The Stihl HSA 94 T is an extremely high-performance and robust professional cordless hedge trimmer with high blade speed for precise cuts. A constant stroke rate even under load, rotating multi-function handle with three-setting stroke rate, double-sided cutting blade in the trimming version, and screw-on cut and tip protector.
Bar length 75 cm.
To run the HSA 94 T with an AP battery the following accessories need to be used; battery belt with AP holster plus connecting cable, or, AP carrying backpack system (see related products above).
- Run time on AP 100 battery: Up to 54 minutes
- Run time on AP 200 battery: Up to 108 minutes
- Run time on AP 300 battery: Up to 135 minutes
- Stihl HSA 94 T Cordless Hedge Trimmer 30″ (Unit Only)
Unit Only Product – Batteries and chargers need to be ordered separately in related products tab above or via our cordless accessory category here – Stihl Cordless Accessories
Double-sided cutting blades
STIHL hedge trimmers with double-sided cutting blades cut both vertically and horizontally.
STIHL EC engine
Alongside their impressive performance, the professional hedge trimmers in the PRO cordless power system have an EC engine with automatic rotation direction switching. This makes it possible to release the cutter when necessary.
Screw-on tip protector
Protects the tip of the hedge trimmer blade from wear, and makes it easier to cut close to walls and the ground.
Screw-on cut protection
Reduces risk of injury to the user and guarantees easy replacement when worn.
Loop handle with inner switch
Comfortable to hold and saves energy during operation, particularly when working for extended periods.
Rotating multi-function handle
Whether for side or top cutting, professional hedge trimmers are always comfortable and balanced in operation. It’s very easy to put the rotating multi-function handle into the optimum position for the task at hand.
Trimming variation (T)
The T variations of STIHL hedge trimmers provide the perfect trimming and shaping of hedges and shrubs. Thanks to the blade shape with smaller tooth spacing and lower tooth height in conjunction with the gearing for a high stroke rate, more specific shapes can also be achieved.
|Rated voltage V
|Blade length cm
|Battery life time AP 100 min 1)
||up to 54
|Battery life time AP 100 (level 1/2/3) min 2)
||54 / 48 / 42
|Run time with AP 200 min 3)
||up to 108
|Battery life time AP 200 (level 1/2/3) min 2)
||108 / 96 / 84
|Run time with AP 300 min 3)
||up to 135
|Battery life time AP 300 (level 1/2/3) min 2)
|Run time with AP 300 S min 4)
||up to 167
|Battery life time AR 1000 min 1)
||up to 380
|Battery life time AR 1000 (level 1/2/3) min 2)
|Battery life time AR 2000 min 1)
||up to 550
|Battery life time AR 2000 (level 1/2/3) min 2)
|Run time with AR 3000 min 3)
||up to 700
|Battery life time AR 3000 (level 1/2/3) min 2)
|Sound pressure level dB(A) 5)
|Sound power level dB(A) 6)
|Vibration value, right m/s2 7)
|Vibration value, left m/s2 7)
|Total length cm
|Stroke rate (level 1/2/3) 1/min
|Tooth spacing mm
|Stroke rate rpm
1) Battery life times are approximate and may vary depending on the application
2) Battery life times are approximate and may vary depending on the application.
3) Run times may vary depending on the application
4) Running times are reference values and may vary depending on the application.
5) K-factor according to DIR 2006/42/EC = 2.5 (dB (A))
6) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
7) K-factor according to DIR 2006/42/EC = 2m / s ²