The Husqvarna 525HE3 is a 25cc pole hedge trimmer with a 60cm cutter bar and high knife speed, designed for professional users. With a reach up to 3 meters, 37mm blade pitch and durable 135° angle adjustment this versatile machine is suitable for both tall and low hedges. The engine serves as a counterweight and makes the machine exceptionally well-balanced and comfortable to use. Equipped with a rear bumper and intuitive controls for easy starting.
X-Torq® engine
The X-Torq® engine design increases torque over a wider rpm range providing maximum cutting power.
Smart Start®
The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%.
Adjustable cutter bar
Adjustable cutting bar for greater versatility and less tiring work.
Auto return stop switch
Stop switch automatically resets to the ON position for trouble-free starting.
Rear impact guard
The rear impact guard protects the engine from wear and damage.
Intuitive controls
The choke and purge are easy to reach and understand.
Stand-alone starter
The stand-alone starter makes it easy to change the starter cord if needed.
Transport mode
Cutter bar in transport mode for easy transport and storage.
Fuel pump
Fuel pump designed for easy starting.
Brand |
Husqvarna |
Power Type |
Petrol |
Engine Power Output |
1.0kW (1.34hp) |
Blade Length |
24″ / 60cm |
Starting System |
Recoil |
Blade Type |
Double-Sided |
Blade Stroke Rate |
4300/min |
Tooth Gap |
30mm |
Total Length |
180cm |
Vibration Levels |
5.6 / 4.4m/s² (front / rear) |
Noise Levels |
107dB(A) |
Weight |
6.5kg |
Warranty |
2 Years* |
Engine Capacity |
25.4cc |
Fuel Type |
Petrol 2-stroke |
*Warranty is subject to conditions and an annual service
Kevin Ballard (verified owner) –
Purchase and delivery went very smoothly with up to date emails and text messages, thank you Radmore & Tucker will be purchasing from yourselves again in the future.
The only flaw is with Husqvarna itself with the back handle when putting it together, very badly finish with cheap flimsy fittings. If you tighten the star screws up to a reasonable light touch the spacer comes clean off.
Remedy, drill out the spacer and put a normal M5 x 40mm threaded pozi screw, works a treat.