XTC rope was designed specifically for the demanding needs of the professional arborist. XTC is a tight braid consisting of 16 individual strands of polyester. A high twist core of torque balanced polyester keeps the construction firm and round, providing an extra measure of safety.
XTC is an excellent choice as a climbing line due to its non-snagging, abrasion-resistant construction and excellent energy absorption characteristics.
YALE Cordage XTC Fire is CE Certified to BS EN1891:1998 Standard Type A
Yale XTC Fire 13mm Climbing Rope 15m, 25m, 35m or 45m – with 1 Spliced Eye
Failure to follow the rope care guidelines issued with the rope outlining the correct use and care may give rise to a situation that could endanger the user’s life. The manufacturer cannot be liable for the abuse or misuse of safety equipment. All risk is the responsibility of the user. A copy of the rope care guidelines can be downloaded from our website (see download section)
Spliced Eye Termination:
The Spliced Eye termination has been specifically designed to replace the need for creating a knotted termination in Low Stretch rope to which a connector can be attached. Low stretch lines are designed for use as general-purpose positioning, restraint & rescue lines. They are not for use in a personal fall arrest system and should always be used in conjunction with ascending, descending and safety hardware and devices for positioning work meeting relevant CE Standards.
Before use, a detailed risk assessment must be carried out by a competent person to establish that this is the correct product suitable for the type of work being undertaken; your anchor point conforms to industry standards and meets the requirements of CE EN795 (B), potential fall distance, obstructions, and rescue systems have been addressed. Purchasers and users should seek professional training from a fully qualified and competent instructor prior to engaging in any activity using this equipment. If you are not able, or not in a position to assume this responsibility, do not use this product. The manufacturer its distributors and retailers do not accept any liability if users do not follow the instructions correctly. Prior to each use a complete risk assessment must be carried out to ascertain that this product configures with and is appropriate to the work being undertaken.
This product has been independently tested and certified to the BS EN1891:1998 Standard in accordance with section 4.12.2 Static strength with terminations. Type A rope terminations are required to sustain a minimum force of 15kN for a minimum period of 3 minutes. (Tested in accordance with section 5.10 of the BS EN1891:1998 standard)
Manufacturer: Yale Cordage
Line Diameter : 12.6mm
Spliced Eye: Yes
Over Braid: 16-Strand
Material (outer): Polyester
Material (inner): Polyester
Standard: EN1891 (A)