As a fully waterproof and breathable smock, the Arbortec Breathedry ATHV4400 conforms to EN343 Class 3, and incorporates an increased back length to shed water, and a high collar with waterproof zipper, inner placket and neck protector.
The Breathedry waterproof overhead jacket is a lightweight technical garment, with an array of features which have been included with the arborist in mind.
Inside the collar is stowed a large, adjustable helmet compatible hood – designed to be able to fit over a climbing helmet. The hood has a wired peak, a bungee volume adjuster draw cord, and a large hook & loop storm flap.
The sleeves are off generous length, and have inner soft cuffs with thumb loops, plus hook & loop tab fasteners to keep the cuffs watertight.
A large breast pocket with waterproof zipper can take a smart phone, and further large pouch pocket can be accessed by long side zippers. The pouch pocket also acts as a ventilation point, with mesh panels inside.
Further ventilation ports are concealed beneath zippers in the armpits, and there is an access zipper at the bottom of each side, useful when wearing a climbing harness.
The Breathedry waterproof overhead jacket is available in a number of smart colour options. This high visibility orange version conforms to EN ISO 20471 Class 3 and GO/RT 3279 (RIS-3279-TOM).
- EN ISO 20471 Class 3
- GORT 3279 & RIS-3279-TOM
- 100% waterproof & breathable
- Helmet compatible hood
- Waterproof zippered pockets
- Underarm and pocket vent system
- Flexible segmented reflective bands
Breathedry Smock Size |
Chest Size |
cm |
inch |
Small |
94 – 102 |
37 – 40 |
Medium |
102 – 110 |
40 – 43 |
Large |
110 – 118 |
43 – 46 |
X Large |
118 – 126 |
46 – 50 |
2X Large |
126 – 134 |
50 – 53 |
3X Large |
134 – 142 |
53 – 56 |
Jon (verified owner) –
Quality waterproof jacket, I would say spot on with the sizing as I am 44in chest and have a large jacket which has plenty of room to get a couple of layers underneath.