Oregon 16″ PowerSharp 3/8″ Low Profile .050″ (1.3mm) Chainsaw Guide Bar + Unit 542315 (for Stihl)

(1 customer review)

£33.60 (inc VAT)

Usually dispatches within 7 to 10 working days.

SKU: OR-542315

Related products

The Oregon 542315 Powersharp Guide Bar & Unit 16″ is an easy to use, precision sharpening system that gives chain saw users the power to sharpen their own chain in a matter of seconds with a simple attachment.

TO FIT STIHL CHAINSAW MODELS: 009, 010, 015, 018, 020, 021, 023, MS170, MS170D, MS171, MS180, MS180CBE, MS181, MS181CBE, MS191, MS191T, MS192, MS192CBE, MS200T, MS201, MS201T MS210, MS210CBE, MS211, MS211CBE, MSE140CBQ, MSE160CBQ, MSE180CBE, MSE200CBQ, MSE220CBQ

Powersharp Chain & Stone to Fit – Oregon PS55E Powersharp Chain & Stone 16″ (Stihl)

Fast.
From dull to sharp in as little as 3 seconds.
Easy.
Only three steps to faster, easier cutting.
Portable.
Bar-mount sharpener is lightweight, durable, and highly visible.
Precise.
Exact alignment between cutter and honing surface for perfect angles and knife-sharp edges.
Tough.
PowerSharp® chain is as durable and hard-working as other Oregon® 3/8″ pitch, low-profile chain.

Brand

Bar Length

Pitch

3/8" Low Profile (3/8" P, 3/8" Mini, 3/8" LP)
Gauge

.050" (1.3mm)

1 review for Oregon 16″ PowerSharp 3/8″ Low Profile .050″ (1.3mm) Chainsaw Guide Bar + Unit 542315 (for Stihl)

  1. Richard Kaiser (verified owner) –

    I have dealt with Radmore & Tucker for decades . I purchased my first chain saw from them, a Husqvarna 262XP in about 1990. Since then I have also purchased strummers, a flymo GT500.
    A Husqvarna R 213 ride on mower and my latest edition a Stihl MS 181c chain saw.
    I decided to treat myself to an Oregon PowerSharp kit to avoid the chore of chain sharpening!.
    A quick phone call to R & T who quickly sorted out exactly what I needed.
    A couple of days later a large box arrived . The kit comes in two parts: In my case a 16 inch PS55E chain and sharpening stone : a separate Oregon 542315 16 inch chain bar and sharpening adaptor.
    The chain and bar are very easy to fit , double check orientation of chain WARE GLOVES as the chain is wickedly sharp. Tighten chain. You are now ready to cut !!!. Open sharpening adaptor and slide in sharpening stone,
    ( it only goes in one way) . With the arrow pointing upwards slide the two pins through the chain bar close and lock it. – you are now ready to sharpen!.
    Start the saw – run a full speed and gently pressing in the spring loaded plunger against a firm vertical surface until sparks fly – count to about 3, and stop the saw.
    ALL DONE!. Before you start assembling the kit
    Please READ THE INSTRUCTIONS.
    Radmore &Tucker are a great company to deal with and are extremely knowledgeable and helpful especially if you have any problems. Their deliver service is outstanding.

Add a review

Your email address will not be published. Required fields are marked *

You may also like