BCS Laser Scythe Cutter Bar

(1 customer review)

£1,127.62£1,464.22 (inc VAT)


Cut vegetation of any height or density up to 1” thick with the Laser® scythe cutter bar. It’s ideal for managing wildflower meadows and cutting long grasses for haymaking.

The scythe has anti-clog serrated blades that will effortlessly cut through woody material up to 1” diameter, including brambles and even first year saplings. They also excel at cutting tall grass, bracken, wildflowers and more.

The Laser® scythe cutter bar comprises two blades. The top blade moves from side to side and is fitted with a number of serrated triangular teeth.

The scythe makes a single scissor-like cut at the base of the vegetation, leaving the material whole. This is what makes the scythe the best tool for cutting long grass for haymaking and for cutting wildflowers.

Because the cutter bar is located out at the front of the machine it can get into areas that other mowers can’t, such as under fences, round the base of trees, at the edge of water, and so on.

The cutting height is easily increased or decreased from ¾” (2cm) to 3¼” (8cm) by adjusting the skids that are positioned on each side of the cutter bar.

They are also very economical to run as the power unit should never be on more than one-quarter throttle so fuel consumption is very low.

Which power units will the scythe cutter bar fit to?

80cm (32″) 100cm (40″) 115cm (45″) 135cm (53″) 155cm (61″)
Short oil bath Short oil bath Short oil bath Long oil bath Short oil bath Long oil bath Long oil bath
BCS 710
BCS 728
BCS 738
BCS 740
BCS 750
BCS 615L
BCS 615SL ✔* ✔* ✔*
BCS 630

 *Not GP160 engine model.

What are the minimum power unit requirements?

4.8hp petrol engine.

One working speed.

4.00 x 8 agricultural wheels.


Are any couplers or toolbars needed?

If the power unit has the implement quick coupling fitted then you will need an additional coupler.

Please note: The BCS 660HY and 750 power units have their own specific coupler.


Is there anything else required?

If the machine is being used on sloping banks then twin wheels or steel bank wheels are recommended to help improve traction and stability.


80cm (32") Short Oil Bath, 100cm (40") Short Oil Bath, 115cm (45") Short Oil Bath, 115cm (45") Long Oil Bath, 135cm (53") Short Oil Bath, 135cm (53") Long Oil Bath, 155cm (61") Long Oil Bath


1 review for BCS Laser Scythe Cutter Bar

  1. Bure Valley Conservation Group

    Our conservation group owned a second hand BCS 630 with the old-style laser cutter bar driven by universal joints and an eccentric bearing. It was getting a bit rattly and would have been expensive to restore to anything like good condition, so we decided to splash out on a new complete attachment. We should have done it ages ago. The new one with long oil bath has reduced vibration, is far less noisy and the weight distribution is much improved. We would probably have spent about half the cost of a new one trying to repair the old one with new wear parts, a blade, some bearings etc.
    Radmore and Tucker supplied at a very competitive price. We are very pleased with our purchase.

Add a review

Your email address will not be published. Required fields are marked *

You may also like